|
| |
|
ACR8010
(1-8 Axes) ISA Bus /
Standalone Motion Controller
|
The
ACR8010 is Acroloop Motion Control Systems’ newest and most
feature-packed controller for ISA PC Bus Operation. The ACR8010 is capable
of Standalone or PC-Bus operation. It has the ability to run up to eight
servo loops, with up to 10 encoders at 20MHz. It can optionally be
equipped with 8 analog inputs through a 12 or 16 bit analog/digital
converter and introduce these inputs into servo loops. It is possible to
have a Virtual Axis be the Master to multi-axis coordinated motion; it is
also possible to have several axis of servo with several axis of stepper
on the same controller. All Acroloop Motion Control Systems’ controllers
run on the same software and firmware, so the standard features and
benefits apply to the ACR8010 as well. |
|
The
ACR8010 is Acroloop Motion Control Systems’ answer to affordable high
performance control when flexibility, real-time speed, and ease of
programming are most needed.
|
ACR8010
Exclusives:
60 MHz Floating Point DSP.
8 Axes of Servo or Stepper.
Up to 10 Encoders at 20 MHz.
512K User/System Memory Expandable to 2 Megs each.
Encoder Loss Protection.
64 Optically Isolated 24Volt DC I/O Expandable to 320 I/O.
Dual Port Memory Option.
Calendar Clock Option.
Full Size ISA Size Plug and Play.
Up to four Communication Channels. (ISA, COM1, COM2, LPT).
Optional RS232/RS485 and AcroWire IEEE-1394 Interface. |
|
