  |
| FlexMax brushless DC drives represent a new concept
in motion control technology. This very fast servodrive, based on the
VECONTM DSP and integrated with
versatile and innovative hardware, is aimed at providing real-time control
of servosystems. When you combine FlexMax with Powertec's brushless
DC motors, you get the highest performance available anywhere in a
high-power servosystem. |
| FlexMax is an IGBT servodrive particularly suited
for high bandwidth applications with brushless servomotors. Thanks to the
innovative software installed on the flash eprom, it can be considered as
a combination of a digital drive and a PLC using a special software tool
called WinPx. |
FlexMax features full digital regulation with a
16 KHz cycle, a 5 KHz current loop bandwidth, a position loop with zero
tracking failure, an analog interface, some dedicated digital interface,
and I/O expansion. |
| High
reliability IGBT Power Bridge |
No
unexplained, random power components failures |
| Built-in
4 quadrant braking up to size PX-100 |
Regen
braking available at no extra cost |
| Standard
remote mountable, multi-position Keypad Display |
Flexibility
for convenient access and readability at any mounting height |
| PC
interface set-up program standard |
Develop/file
complete drive set-up; copy and modify |
| Powerful
software configuration for speed, torque, or position operation |
Do
all your applications with one drive type including multi-axis positioning
or simple speed control |
| Electronic
Line Shaft standard with no wiring between drives (using Fast-Link) |
Provides
built-in high accuracy shaft-to-shaft tracking |
| Fast-Link,
4 Mb/sec data exchange between drives |
Makes
critical drive data available to all drives at the same time |
| All
power derived from the DC bus allowing the storage of power in the
capacitor bank |
Drive
requires no other power source for operation |
| Widest
input voltage operating range in the business: 480 vac +10% to 230 vac
-15% |
Trouble-free,
trip-free operation in marginal power situations. Nominal voltages
including: 208, 220, 230, 380, 400, 415, 460, 480 vac |
| Intelligent
Power Loss Protection |
Standard
feature provides ride through/coast through protection for most power loss
events |
| Shaft
position control allows true 0% speed regulation |
Steady-state
speed will not vary from no-load to full-load |
